This is my take on the Style Arc Candice skirt. Excuse the severe pattern clashing, solid colour tops are on the make list and rising rapidly to the top of it!!
It's quite similar in style to the Upton Skirt, the primary difference is that in the pattern the pleats are stitched down for 5 inches from the waistband.
I wasn't entirely convinced that I'd be able to sit down in a skirt with pleats stitched down that far, so it tried pinning the pleats of my Upton Skirt down that far and trying it on. Turns out my suspicion was correct – the skirt looked weird on even while standing and sitting was an issue. So, on my version of the skirt I didn't stitch the pleats down.
The size of the pattern pieces for this skirt mean you either have to use 150cm wide fabric, or run it down 112cm wide quilting cotton – it's too wide to fit selvage to selvage on quilting cotton. Although this makes it perfect for full width border prints which is what I used for this one!
The only other adjustment I made to this skirt was to lengthen the waistband just a little and make the pleats just a fraction shallower. These were primarily driven by laziness and not wanting to be bothered with cutting out and sticking together the 40-something pages required to go to the next size up, when 5 minutes of messing around did the trick.
This is probably only the downside of buying Style Arc patterns from their Etsy store – you get 3 sizes of the pattern, but they're not nested in the same file so grading between sizes either requires another round with the scissors and tape or eyeballing it… eyeballing it won 🙄 ✂️
Now I really need to make some of those solid coloured tops – this skirt needs to be out and about… the guys at work are going to love it! 😎